BMW X1 20d 174 BHP EDC17CP02 Stage 1 Remap
The BMW X1 20d from 2007 to 2009 comes fitted with the Bosch EDC17CP02 ECU which responds very well to our Stage 1 remap.
With our stage 1 remap we elevate the BMW X1 20d from its standard 174 BHP to a robust 230 BHP, complemented by a torque enhancement from the stock 350Nm to an impressive 440Nm. This upgrade ensures a balance between power and smoothness, optimising both for your transmission, whether it’s a manual or an automatic and enhancing your driving pleasure.
Installing the HDI Tuning Remap on your BMW X1 20d will immediately showcase the reasons behind our popularity. We focus on a significant increase in both torque and power, while ensuring the process is safe for your engine, keeping the torque flow smooth, strong, steady and reliable. Our remap is carefully crafted, adjusting the torque curve to harmonize with your engine’s airflow and specific dynamics.
HDI Tuning’s expertise isn’t limited to HDI models. Our deep understanding of engine tuning, particularly in BMW EDC17 tuning, stands out in the industry, we’re a step above the rest when it comes to diesel tuning. Our remap for the BMW EDC17 exemplifies our superior tuning skills.
The Bosch EDC17CP02 ECU can be programmed by you using our MyGenius tool. This user-friendly tool allows for easy programming through the OBD port, bypassing the need to dismount the ECU. It offers the versatility to switch remaps as needed, and we can provide multiple maps with various power levels.
Price:
- Online remap MyGenius £120
- Online remap service £150
- Postal remap service £200
- Drive in remap from £250
Programming Methods – OBD2 or KTAG
Programming via OBD EDC17
- Obtain a suitable programming tool; we recommend to use Dimsport MyGenius.
- Connect to the OBD port of your car, make sure you have battery support to the vehicle battery.
- ID the ECU and then take a read of the ECUs flash memory.
- Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
- Send payment through our webshop.
- We will modify the software and send back to you. This normally takes less than 2 to 3 hours during working days.
- Using the same tool you can then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process.
- Let your engine warm up and then take the car for a spin, enjoy the extra power!
Bench Programming via KTAG EDC17
- Order a suitable tool such as KTAG
- Install the tool to a reliable laptop.
- The ECU must be removed from the vehicle, and then the ECU needs to be opened, don’t attempt this unless you know what you are doing otherwise you can damage the ECU.
- Connect boot pin to processor and CAN hi Lo / +12v / GND to pins on ECU
- ID the ECU and then take a read of the ECUs memories for a backup (please save separately, and not as a combined file).
- Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
- Send payment through our webshop.
- We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
- Using the same tool, ID then write to the ECU. This will overwrite the ECUs memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about (You can always repair an ECU if you take a full backup of all memories).
- Straighten the lid on the ECU and seal with a little silicone.
- Refit the ECU and start the engine.
- Let your engine warm up and then take the car for a spin, enjoy the extra power!