Peugeot 3008 2.0 BlueHDI 180 Stage 1 remap (
203 BHP |
Pondering remapping your Peugeot 3008 2.0 BlueHDI 180 engine? Look no further. Our sophisticated HDI Tuning software remap, designed for the Delphi DCM6.2 ECU, was meticulously developed in house using advanced tuning strategies. This ECU model is complex with multiple layers of torque monitoring. We perform a variety of intricate reverse calculations, ensuring all advanced software and reverse protection maps are contented. What’s the takeaway for you? When the torque model in the ECU is fine-tuned properly, it leads to optimal driveability, delivering progressive and safe power. The reliability embedded in an HDI tuning remap is crucial when tuning your vehicle.
The stage 1 remap for the Peugeot 3008 2.0 BlueHDI 180 amplifies the power to 203 BHP and augments torque to 440Nm. The seamless torque delivery will catch you by surprise, along with the delightful top end power.
For DIY enthusiasts, Dimsport MyGenius is ready for use over OBD and can be obtained from our webshop. Simply connect to the OBD port, gather the original data, transmit it to us, and we’ll modify your remapped software. When we send back the remapped software, you only need to program it onto the ECU, using a battery stabiliser to ensure voltage consistency during the programming phase.
We have also ascertained that this remap, tested with the automatic gearbox, is safe and free from adverse impacts on the auto box. If you’re searching for a superior quality remap at an excellent price, HDI tuning is the solution for you, ensuring the car drives beautifully with factory calibrations for a more potent engine, focusing on reliability and delightful driving experiences.
Which vehicles are covered?
The power figures quoted on this page are applicable to the following vehicle models if fitted with the Delphi DCM6.2 ECU and has the 180 BHP engine:
Peugeot 308 2.0 BlueHDI 180 BHP
Peugeot 508 2.0 BlueHDI 180 BHP
Peugeot 5008 2.0 BlueHDI 180 BHP
Peugeot RCZ 2.0 BlueHDI 180 BHP
Peugeot Expert 2.0 BlueHDI 180 BHP
Peugeot Boxer 2.0 BlueHDI 180 BHP
Citroen C4 2.0 BlueHDI 180 BHP
Citroen DS4 2.0 BlueHDI 180 BHP
Citroen C5 2.0 BlueHDI 180 BHP
Citroen DS5 2.0 BlueHDI 180 BHP
Citroen Dispatch 2.0 BlueHDI 180 BHP
Citroen Jumpy 2.0 BlueHDI 180 BHP
Citroen Relay 2.0 BlueHDI 180 BHP
Citroen Jumper 2.0 BlueHDI 180 BHP
If your vehicle is not listed directly but you have the Delphi DCM6.2A or DCM6.2C ECU fitted you can assume these figures can also be achieved on your vehicle.
Programming Methods – OBD2
The Delphi DCM 6.2 ECU is reliable to program directly over OBD using genuine tools (no clones), there is no need to remove the ECU. Dimsport MyGenius is able to do this over OBD.
Recommended programming method:
Program over OBD using the Dimsport MyGenius standalone tool
The Dimsport MyGenius tool is the safest, easiest and most reliable way to program your ECU from home. Simply connect to the OBD port and let the tool do the work, no need to remove your ECU or bench program for most ECU types. For more information have a read herePlease note that not all tools support 6.2C over OBD but most will be ok with 6.2A.
Programming via OBD Delphi DCM6.2
- Obtain a suitable programming tool, we recommend Combiloader, Bitbox, or any genuine tuning tool such as Kess V2 Kess V3
- Install the tool to a reliable laptop.
- Connect to the OBD port of your car, make sure you have backup chargers to the vehicle battery and the laptop battery.
- ID the ECU and then take a read of the ECUs flash memory.
- Email the software to email@example.com along with a description of the remap you require.
- Send payment through our webshop.
- We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
- Using the same tool, ID then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process.
- Let your engine warm up and then take the car for a spin, enjoy the extra power!