BMW F30 F31 3 Series 316D 114 BHP EDC17C56 Stage 1 Remap
The BMW F30 and F31 316D models from around 2012 onwards are equipped with the Bosch EDC17C41 or EDC17C56 ECU and initially come with a conservatively tuned software version. These engine models show a remarkable affinity for Stage 1 remapping, greatly benefiting from the significant room for enhancement left by the factory settings.
Our Stage 1 remap substantially elevates the original 114 BHP to an impressive 179 BHP and boosts torque from the standard 260Nm to a potent 390Nm. This upgrade is carefully calibrated to ensure a smooth and refined power delivery, thereby protecting your clutch or automatic transmission and ensuring an exhilarating driving experience.
The impact of the HDI Tuning Remap is immediately noticeable, showcasing why our services are highly regarded. Our approach to augmenting power and torque focuses equally on performance, engine smoothness, and longevity. The remap is intricately designed, optimizing the torque curve to align seamlessly with the engine’s airflow dynamics and its specific hardware.
HDI Tuning’s expertise extends beyond HDI engines. Our deep knowledge in engine tuning, especially with BMW’s EDC17 series, places us ahead of many tuning companies. Our remap for the BMW EDC17 is a testament to our advanced tuning knowledge and skills.
Programming the Bosch EDC17C41/EDC17C56 ECU is simplified with our MyGenius tool, enabling easy programming through the OBD port without the need to remove the ECU. This tool allows for easy modification of remaps to suit your preferences, and we can also provide various maps with different power settings or removal options.
Price:
- Online remap MyGenius £120
- Online remap service £150
- Postal remap service £200
- Drive in remap from £250
Programming Methods – OBD2 or KTAG
Programming via OBD EDC17
- Obtain a suitable programming tool; we recommend to use Dimsport MyGenius.
- Connect to the OBD port of your car, make sure you have battery support to the vehicle battery.
- ID the ECU and then take a read of the ECUs flash memory.
- Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
- Send payment through our webshop.
- We will modify the software and send back to you. This normally takes less than 2 to 3 hours during working days.
- Using the same tool you can then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process.
- Let your engine warm up and then take the car for a spin, enjoy the extra power!
Bench Programming via KTAG EDC17
- Order a suitable tool such as KTAG
- Install the tool to a reliable laptop.
- The ECU must be removed from the vehicle, and then the ECU needs to be opened, don’t attempt this unless you know what you are doing otherwise you can damage the ECU.
- Connect boot pin to processor and CAN hi Lo / +12v / GND to pins on ECU
- ID the ECU and then take a read of the ECUs memories for a backup (please save separately, and not as a combined file).
- Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
- Send payment through our webshop.
- We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
- Using the same tool, ID then write to the ECU. This will overwrite the ECUs memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about (You can always repair an ECU if you take a full backup of all memories).
- Straighten the lid on the ECU and seal with a little silicone.
- Refit the ECU and start the engine.
- Let your engine warm up and then take the car for a spin, enjoy the extra power!