Mon - Fri 08:00-18:00
remap@hdi-tuning.co.uk   

BMW E90/E91 3 Series 320D 161 BHP EDC1741 2010 to 2011

240 BHP

Stage 1 Power

474 Nm

Stage 1 Torque

Banner

BMW E90 E91 3 Series 320D 161 BHP EDC1741 2010 to 2011: Stage 1 Remap

The BMW E90 E91 3 Series 320D Efficient Dynamics from 2010 to 2011, integrates the Bosch EDC1741 ECU, making it an ideal candidate for our specialized Stage 1 remap.

This remap transforms your vehicle from a standard 161 BHP to an impressive 240 BHP, and we increase your torque from 340Nm to an exhilarating 474Nm. Our unique method of torque delivery ensures a seamless and progressive boost, enhancing the performance of your clutch or automatic gearbox. This upgrade is designed to make your driving experience significantly more thrilling.

After upgrading with our HDI Tuning Remap, you’ll immediately notice why our services are in high demand. We don’t just escalate torque and power; we enhance them with precision and care. Our remap is engineered to harmonize with your car’s air mass flow and engine characteristics, ensuring reliability and efficiency.

At HDI Tuning, our expertise in tuning goes far beyond standard practices. With our advanced understanding of BMW EDC1741 tuning, we guarantee a remap that significantly outperforms conventional offerings.

With our MyGenius tool, programming the Bosch EDC1741 ECU is a breeze. This device allows for easy, direct programming via the OBD port, eliminating the need to detach the ECU. The tool also provides the flexibility to switch between multiple remaps for varying power levels.

Note: This model may use any of these Bosch ECU Versions EDC17C41 EDC17C50 EDC17C56

Price:

Programming Methods – OBD2 or KTAG

Programming via OBD EDC17

  • Obtain a suitable programming tool; we recommend to use Dimsport MyGenius.
  • Connect to the OBD port of your car, make sure you have battery support to the vehicle battery.
  • ID the ECU and then take a read of the ECUs flash memory.
  • Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
  • Send payment through our webshop.
  • We will modify the software and send back to you. This normally takes less than 2 to 3 hours during working days.
  • Using the same tool you can then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!

Bench Programming via KTAG EDC17

  • Order a suitable tool such as KTAG
  • Install the tool to a reliable laptop.
  • The ECU must be removed from the vehicle, and then the ECU needs to be opened, don’t attempt this unless you know what you are doing otherwise you can damage the ECU.
  • Connect boot pin to processor and CAN hi Lo / +12v / GND to pins on ECU
  • ID the ECU and then take a read of the ECUs memories for a backup (please save separately, and not as a combined file).
  • Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
  • Send payment through our webshop.
  • We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
  • Using the same tool, ID then write to the ECU. This will overwrite the ECUs memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about (You can always repair an ECU if you take a full backup of all memories).
  • Straighten the lid on the ECU and seal with a little silicone.
  • Refit the ECU and start the engine.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!