Mon - Fri 08:00-18:00
remap@hdi-tuning.co.uk   

3.0 TDV6 210 BHP Bosch EDC17CP11 Land Rover Discovery

290 BHP

Stage 1 Power

600 Nm

Stage 1 Torque

Banner

Stage 1 Performance Remap Land Rover Discovery 3.0 TDV6 EDC17CP11 (290 BHP | 600 Nm)

Unlock the true prowess of your Land Rover Discovery 3.0 TDV6 with our expert Stage 1 Remap. We elevate your vehicle’s performance from an original 210 BHP to a stunning 290 BHP, along with a significant torque boost to 600Nm. Our remap is precision-engineered for the 3.0 TDV6 engine and has been exhaustively tested on automatic gearboxes to deliver the full 600Nm effectively.

Utilizing the sophisticated Bosch EDC17CP11 ECU, our remap finely tunes your Discovery’s performance, ensuring the DPF system’s integrity is maintained and preventing any potential clogging issues. Expect a substantial increase in power and a noticeably smoother, more responsive driving experience.

Our remapping service strikes an excellent balance between boosting performance and ensuring reliability. The remap provides a solid 100Nm increase across the entire rev range, offering you an invigorating upgrade that enhances every facet of your driving experience.

Price:

Programming via OBD EDC17

  • Obtain a suitable programming tool; we recommend to use Dimsport MyGenius.
  • Connect to the OBD port of your car, make sure you have battery support to the vehicle battery.
  • ID the ECU and then take a read of the ECUs flash memory.
  • Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
  • Send payment through our webshop.
  • We will modify the software and send back to you. This normally takes less than 2 to 3 hours during working days.
  • Using the same tool you can then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!

Bench Programming via KTAG EDC17

  • Order a suitable tool such as KTAG
  • Install the tool to a reliable laptop.
  • The ECU must be removed from the vehicle, and then the ECU needs to be opened, don’t attempt this unless you know what you are doing otherwise you can damage the ECU.
  • Connect boot pin to processor and CAN hi Lo / +12v / GND to pins on ECU
  • ID the ECU and then take a read of the ECUs memories for a backup (please save separately, and not as a combined file).
  • Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
  • Send payment through our webshop.
  • We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
  • Using the same tool, ID then write to the ECU. This will overwrite the ECUs memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about (You can always repair an ECU if you take a full backup of all memories).
  • Straighten the lid on the ECU and seal with a little silicone.
  • Refit the ECU and start the engine.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!