Mon - Fri 08:00-18:00

2.0 JTD HDI 110 BHP 2000 – 2005 Bosch EDC15C2

138 BHP

Stage 1 Power

310 Nm

Stage 1 Torque

Fiat Scudo Citroen Jumpy 2.0 JTD 8v/16v 110 BHP Stage 1 (138 BHP | 310 Nm)

When tuning the Scudo based vans we take a slightly different approach to tuning the cars. We actually set a little less peak torque to maintian smooth driving conditions, the turbine outlet and exhaust is smaller than on the cars so it causes a small restriction. Not to worry, the power increase is still pretty large for this one and we gaurantee you’ll be very pleased with it.

Our remap is different to others because we focus on both reliability and driveability, we also like to keep the exhaust emmissions very clean.

The Stage 1 remap is designed for optimum performance and reliability on a standard vehicle with original components. Peak power will be 138 BHP and maximum torque will be increased to an exciting 310Nm. The stage 1 remap offers great performance, driveability and safer overtaking. On top of this you can expect to see economy gains of 3-5 MPG on average.


Programming Methods – OBD2

The EDC15C2 is an old ECU type and as such it’s covered by nearly all tools on the market. The best and most reliable tools to use are Kess V2 and MPPS. These tools can program directly over OBD without needing to remove the ECU. If you’re looking for an on the go flasher which can store up to 10 maps and be used when ever you choose, then we recommend using Dimsport MyGenius.

Recommended programming method:

Program over OBD using the Dimsport MyGenius standalone tool


The Dimsport MyGenius tool is the safest, easiest and most reliable way to program your ECU from home. Simply connect to the OBD port and let the tool do the work, no need to remove your ECU or bench program for most ECU types. For more information have a read here

The read and write processes both take around 1 minute for this ECU type.

How to use the online remapping service:

  • Obtain a suitable programming tool.
  • Install the tool to a reliable laptop.
  • Connect to the OBD port of your car, make sure you have backup chargers to the vehicle battery and the laptop battery.
  • ID the ECU and then take a read of the ECUs flash memory.
  • Email the software to along with a description of the remap you require.
  • Send payment through our webshop.
  • We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
  • Using the same tool, ID then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!