Peugeot Expert 2.0 HDI 163 Stage 1 Remap (190 BHP
| 420 Nm
)
The Peugeot Expert with the 2.0 HDI 163BHP powertrain is an exhilarating drive, and it can be further enhanced with a Stage 1 software modification. The Euro 5 DW10CTED4 16v engine uses the Delphi DCM3.5 control unit. This ECU is notably intricate and includes moderate tuning protection features, highlighting the importance of choosing a knowledgeable tuner familiar with the ECU’s torque model structure. At HDI Tuning, our expertise in HDI engine remapping is unparalleled, and we offer the most advanced remapped software for the DCM3.5.
The Stage 1 remap for the Peugeot Expert 2.0 HDI 163 boosts power to 190BHP and increases torque to a robust 420Nm. The torque enhancement is delivered in a smooth, consistent manner, making for an exciting driving experience.
At HDI Tuning, our remap provides a more significant torque upgrade than many other tuning services, thanks to our intensive development process. This process involves bypassing the ECU’s anti-tune protections and factory torque restrictions. The increased torque is still safe for the vehicle’s clutch and is compatible with automatic transmissions. For those preferring extra caution, we also offer a reduced torque remap for automatic models.
We don’t offer postal remapping for this ECU due to the complexity of bench programming compared to OBD programming. Keeping the ECU in place and programming over OBD is more practical. For enthusiasts interested in self-programming, our Dimsport MyGenius tool in our webshop makes OBD programming straightforward from within your car.
Price:
- Online remap MyGenius £120
- Online remap service £150
- Postal remap service £250
- Drive in remap from £250
Peugeot Expert 2.0 HDI 163 Stage 2 Remap with Performance Exhaust (210 BHP
| 440 Nm
)
The Stage 2 remap for the Peugeot Expert 2.0 HDI 163 engine was designed to run with an intercooler upgrade, and a free-flowing straight through style exhaust system. This remap delivers some extra top end power for those looking for that little bit extra. The exhaust work is important for this higher power remap, you likely won’t achieve the full power of this stage 2 remap without the additional exhaust work. It’s an option to increase the exhaust bore from the DPF onwards or to use a sports DPF and this will keep the vehicle road legal. With 440Nm of torque and 210+ BHP you’re going to notice a big performance gain when running this remap.
Price:
- Online remap MyGenius £120
- Online remap service £150
- Postal remap service £250
- Drive in remap from £250
Programming Methods – OBD2
The Delphi DCM 3.5 ECU is fast and reliable to program directly over OBD, there is no need to remove the ECU.
Programming via OBD Delphi DCM3.5
- Obtain a suitable programming tool; we recommend to use Dimsport MyGenius, you can also use Kess V2.
- Install the tool to a reliable laptop.
- Connect to the OBD port of your car, make sure you have backup chargers to the vehicle battery and the laptop battery.
- ID the ECU and then take a read of the ECUs flash memory.
- Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
- Send payment through our webshop.
- We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
- Using the same tool, ID then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about.
- Let your engine warm up and then take the car for a spin, enjoy the extra power!