Mon - Fri 08:00-18:00

1.5 BlueHDI 100 BHP DV5RD Bosch MD1CS003 EU6.2 Vauxhall Corsa F

130 BHP

Stage 1 Power

300 Nm

Stage 1 Torque

The Vauxhall Corsa F 1.5 BlueHDI 100 is equipped with a highly advanced Bosch MD1 ECU, incorporating robust tuning protection. While this ECU comprises various layers of security measures, our state-of-the-art programming equipment and tailor-made tuning software can safely surmount these barriers. What’s more, we have the unique capability to reprogram this ECU without the need for any physical disassembly. Depending on your choice of workshop, we presently employ Bitbox, Trasdata, Autotuner, or Flex for programming the MD1CS003 ECUs.

Stage 1 Remap for Vauxhall Corsa F 1.5 BlueHDI 100 (130 BHP | 300 Nm)

We have dedicated substantial effort to provide you with the most recent and sophisticated remap for the Vauxhall Corsa F 1.5 DV5RD BlueHDI Engine. Our Stage 1 remap effectively elevates your peak power to 130 BHP, delivering an exhilarating peak torque of 300Nm with a consistently smooth torque curve.
This remap is meticulously designed to align with the factory settings of the 130 BHP variant, ensuring exceptional drivability and reliability for your Vauxhall Corsa F 1.5 BlueHDI 100.

The engine of the Vauxhall Corsa F 1.5 BlueHDI 100 is equipped with an MHI TD02L11 wastegate-regulated turbocharger, celebrated for its rapid spool-up characteristics and long-lasting performance. This turbocharger has undergone extensive testing on the 1.6 eHDI and 1.6 BlueHDI models over several years, incorporating a few subtle enhancements when adapted to the 1.5 HDI Engine. We implement a modest increase in turbo pressure, staying comfortably within the proven and secure range of the TD02 turbo.


Programming Methods – bench programming

The Bosch MD1 ECU can be programmed using Bitbox and a Scanmatik 2 device.

Programming via Bench service mode over CAN with Bitbox

This is our preferred way to program. The ECU must be removed, but there is no need to open the ECU and risk damage. A full backup can be made of both the EEPROM and the internal flash memories.

  • Order a Scanmatik 2 Pro J2534 programming device and a Bitbox dongle with the MD1 license.
  • Remove ECU from the vehicle.
  • Connect specified wires to ECU plug connector.
  • ID the ECU.
  • Read the ECU memories.
  • Email software to HDI Tuning.
  • Wait for us to prepare your remap and return it back to you.
  • Program the remap to the ECU using the same method taken to read the ECU.
  • Refit the ECU, check engine starts.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!