Transit 2.2 TDCI Tuning (Siemens SID208):

BHP

Stage 1 Power

Nm

Stage 1 Torque

Ford Transit tuning

Stage 1 Remap - 160 BHP

There are several models of the 2.2 TDCII engine all with differing power levels, however these all use the same engine with only different ECU software. Our stage 1 remap will take you to 160 BHP and 350Nm. When tuning a work van or a motor home, reliability is key, so although it's possible to go for much more power on this engine we like to keep the power rather modest at just 160BHP.

We've designed the torque curve to be smooth and driveable to protect your cargo and also the gearbox.

The transit 2.2 TDCI Can be program through the OBD port using Kess V2, or with an open ECU using Kess KTAG or KTM Bench.

Cost: Online £99, postal service £200, in shop service £200.

EGR Delete

EGR Delete will require an EGR blanking plate to be fitted. If you have odd hesitiations then it's likely the EGR is jamming and causing problems. EGR delete is free when you purchase a remap or £99 on its own when using the online service, or £200 if you use the postal remapping service. If you're not sure if you require EGR delete, please read here.

DPF Delete

DPF delete is free when you purchase a remap or £99 on its own when using the online service, or £200 if you use the postal remapping service. HDI Tuning have a full software solution to DPF delete which will not give any future problems, and does not require an emulator to be fitted to the ECU. We only recommend DPF delete in situations where repair is uneconomical if the DPF is completely blocked and causing problems, otherwise it's best to stay road legal and keep the DPF fitted. If you're not sure if you require DPF delete, please read here.

Contact HDI Tuning

Thank you
Error occurred while sending email. Please try again later.